Post holder type I with corrugated roll
With European Technical Approval
The post holders are suitable for connecting wooden supports with a cross-section from 10/10 cm. Mounting is carried out from the front side. A rod dowel D = 10 mm is inserted laterally to absorb tensile forces.
Version D = 25 mm can be loaded in compression up to 1 KN more, all other values are the same.
The post holder is set directly in concrete.
For assembly, the post holder is inserted in a D = 24 mm x 130 mm hole on the face side. The bar dowel is installed after fine adjustment.
Steel grade U : S 235 JR according to EN 10025:2004
hot-dip galvanized all around, zinc coating thickness
approx. 55 μm according to DIN EN 1461
|891108*||Post holder type I with corrugated roll Ø20||100||250||130||24||4||1||Piece||Download|
|891125||Post holder type I with corrugated roll Ø20||100||400||130||24||4||1||Piece||Download|
|891153||Post holder type I with corrugated roll Ø25||100||250||130||24||4||1||Piece||Download|
|891152||Post holder type I with pipe corrugated Ø25||100||400||130||24||4||1||Piece||Download|
* Articles have no approval