Post holder type I
dowel-mounted
With European Technical Approval
(ETA-13/1063)
Application:
The post holders are suitable for connecting wooden supports with a cross-section from 10/10 cm. Mounting is carried out from the front side. A rod dowel D = 10 mm is inserted laterally to absorb tensile forces.
Assembly:
The post holder is anchored to the floor slab. For assembly, the peg of the post support is inserted in a hole D = 24 mm x 130 mm on the face side. The bar dowel is installed after fine adjustment.
Steel quality:
Steel grade U : S 235 JR according to EN 10025:2004
Corrosion protection:
hot-dip galvanized all around, zinc coating thickness
approx. 55 μm according to DIN EN 1461
Performance
Download as PDF
Approval
Download as PDF
Data Sheet
Download as PDF
| Art.No. Gutzeit | Description | Dimension | mm | Amount | PU | Unit | Sketch | |||
|---|---|---|---|---|---|---|---|---|---|---|
| □A | L | ØD | L1 | Ø13 | Ø11 | |||||
| 891131 | Post holder type I - dowel-mounted | 100 | 100 | 24 | 120 | 4 | 2 | 1 | Piece | Download |
| 891132 | Post holder type I - dowel-mounted | 100 | 150 | 24 | 120 | 4 | 2 | 1 | Piece | Download |
| 891213* | Post holder type I - dowel-mounted | 100 | 200 | 24 | 120 | 4 | 2 | 1 | Piece | Download |
| 891214* | Post holder type I - dowel-mounted | 100 | 250 | 24 | 120 | 4 | 2 | 1 | Piece | Download |
| 891250* | Post holder type I - dowel-mounted | 100 | 300 | 24 | 120 | 4 | 2 | 1 | Piece | Download |
* Articles have no approval