Rafter purlin anchor left-right

With European Technical Approval

(ETA-09/0104)

Application:

The rafter purlin anchors are mainly used for the tensile connection of two timbers that cross at right angles in plan. They are particularly suitable for transmitting wind suction forces, for securing the position of rafter purlins on hall trusses and for transmitting permanent loads such as a suspended beam layer on purlins.

Assembly:

The rafter purlin anchors must always be installed in such a way that there is the greatest possible edge distance between the nails on both connected components. The rafter purlin anchors are fastened in the wood with special nails Ø 4.0 x 40 of load-bearing capacity class 3/C with a profiled length of 31 mm. The number of rafter purlin anchors used depends on the respective load.

Steel quality:

DX51D + Z 275 according to DIN EN 10327:2004

(see also approval)

Corrosion protection:

275 g/m2 on both sides – corresponding to a zinc coating thickness of approx. 20 μm