Angle connector without bar 90x48x48

With European Technical Approval

(ETA-09/0133)

Application:

The Gutzeit angle connectors without bar offer versatile application possibilities.

They are used for fastening squared lumber to masonry, concrete, etc., as well as wood/wood joints. However, if greater demands are placed on the product, the use of angle connectors with a web is recommended.

Assembly:

The angle connectors are fastened in the wood with special nails / comb nails Ø 4.0 x 40, load capacity class 3/C, profiled nail length_lef ≥ 31 mm, bolt Ø 12 mm.

It is essential that the comb nails are driven into the load-bearing beam as close as possible to the bending line. This also applies to the bolts used when using the angle connectors for fastening wood to e.g. concrete.

Steel quality:

DX51D + Z 275 according to DIN EN 10327:2004

(see also approval)

Corrosion protection:

275 g/m² on both sides – corresponding to a zinc layer thickness of approx. 20 μm.